JR-1 Electromagnetic Induction Quick Heater
Introduction
JR-1 electromagnetic induction heater can heat metals such as nails and wires within 2 seconds. Suitable for removing internal broken branches in injection molds, safe, environmentally friendly, and fast and convenient. This product has good safety and high thermal efficiency, and low power consumption.
Technical Parameter
Rated voltage: 220V Frequency: 50HZ
Usage Method
Clamp one end of the iron nail or wire tightly with a pointed pliers, and place the other end on the two copper electrodes of the heater. The iron nail or wire will turn red in about 2 seconds and then can be used.
Note
- A grounded power socket must be used. Generally, two copper electrodes will not cause electric shock. Please cut off the power after use.
- This product is specifically designed to heat iron nails or wires, and cannot heat copper and aluminum to avoid danger.
- The heating iron cannot exceed a diameter of 5mm
- The two copper electrodes will turn black or stick to plastic after prolonged use. Please use sandpaper to polish them and use continually.
