AirTAC Rodless magnetic cylinder RMT20×200S
Ordering Code
Specifications
Bore size(mm) | 16 | 20 | 25 | 32 | 40 |
Acting type | Double acting | ||||
Fluid | Air(to be filtered by 40um filter element) | ||||
Operating pressure | 0.2~0.7MPa(30~100psi(2.0~7bar) | 0.25~0.7MPa(36~100psi(2.5~7bar) | |||
Proof pressure | 1.2MPa(175psi)(12.0bar) | ||||
Temperature | -20~70 | ||||
Speed range mm/s | 50~400 | ||||
Stroke tolerance mm | 0~2500+1.0 251~10000+1.5 1001~0+2.0 | ||||
Cushion type | Fixed cushion Shock absorber(Available) | ||||
Safe holding force N | 140 | 220 | 345 | 560 | 880 |
Port size 【Note1】 | M5×0.8 | 1/8” | 1/4” |
Bore size (mm) | Standard stroke (mm) | Max.std stroke |
16 | 50 100 150 200 250 300 350 400 450 500 | 750 |
20 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 | 1000 |
25 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 | 1500 |
32 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 | 1500 |
40 | 50 100 150 200 250 300 350 400 450 500 600 700 750 800 900 1000 | 1500 |
Models
RMT20x200, RMT20x200S, RMT20x200SA, RMTL20x200S, RMTL20x200SA.
Dimensions
Farrah Upwall –
Hello there! This is kind of off topic but I need some advice from an established blog. Is it very difficult to set up your own blog? I'm not very techincal but I can figure things out pretty quick. I'm thinking about making my own but I'm not sure where to begin. Do you have any tips or suggestions? With thanks
https://www.smortergiremal.com/